![Jacobsen-Logo-REV.png]](https://connect.jacobsen.co.nz/hs-fs/hubfs/Jacobsen-Logo-REV.png?height=40&name=Jacobsen-Logo-REV.png){kind=logo}
Products
Product information
Frequently Asked Questions
Slip Resistance
Vinyl Flooring
Linoleum Flooring
Wood Flooring
- What is the best way to clean and maintain a wood floor?
- If my floor gets damaged by an accident, how can it be repaired?
- Do you recommend underfloor heating under wood flooring?
- Are wood floors suitable for bathrooms?
- Will the installed wood floor look like the sample piece I have?
- What does the grade mean?
- What is the difference between plank and 3-strip formats?
- Is solid wood flooring better than prefinished engineered wood flooring?
- What is an 'engineered' wood floor? Is it real wood?
Regupol 4515 Acoustic Underlay
- What flooring products can Regupol 4515 be used with?
- Is Regupol Fire Resistant?
- Can Requpol 4515 be used under floating timber floors?
- Can Regupol 4515 be loose laid over the substrate when covered with timber flooring and/or tiles?
- Can Regupol 4515 be used in wet areas both externally and internally?
- Can Regupol be used with underfloor heating?
- In what type of format does Regupol 4515 come?
- What is Regupol 4515 made of?
- What does Regupol 4515 offer as a db sound insulation?
- Will Regupol 4515 meet the NZBC requirements?
- What sound insulation performance does the NZBC require for intertenancy Buildings?
- I see the initials db, IIC and FIIC referred to when reading about sound reduction, what do these mean?
- What does Regupol 4515 Impact Sound Insulation do?
- What is Impact Sound?
- Why do I need to use a (Regupol 4515) Impact Sound Acoustic Underlay?
Rubber Flooring - Tarkett Johnsonite
- What is the recommended cleaning product to be used?
- Are there special pads required for cleaning and maintenance?
- Installation: Coving – wall base system, need any expansion, sits on top of any type of floorcovering-carpet/tiles/vinyl/rubber etc?
- Dimensional stability – Are there any issues acclimatising the product (other than with standard resilient flooring) when being installed in a new building in the middle of winter?
- Joins in healthcare / surgical environments - With this being a tile format how do joins not become an issue with dirt / infection control?
- How do we finish External Corners?
- Wet room/bathroom suitability? How do we install around drains?
- Are there any limitations to installing rubber tiles? Commercial environments?
- Can you repair a small cut, or do you need to replace the full tile?
- Are these textures designed to be laid monolithic or quarter turned?
- Does the rubber need any specific acclimatization before installation?
- Does it have any particular Rubber migration issues similar to PVC Plasticiser Migration?
- Are there any chemicals that have an adverse reaction to product?
- Is there any variation in sizing between batching?
- Some of the textures like the woodgrain/concrete/bamboo etc, do they have a pattern repeat or is each tile the same?
- Can it be installed in Garaging and does the Tyres and car oil affect the product?
- Why it is better than vinyl in healthcare?
- How does it react to cooking fats?
- What is the rubber made of?
- 2mm vs 3.17mm thickness of flooring. What's the difference?
- Please explain dye lots, why this is not a consideration for Johnsonite Rubber?